News
:
This forum is now permanently frozen.
m0n0wall Forum
>
m0n0wall Support (English)
>
Firewall/NAT
Topic: DMZ w/Public IPs
Pages: [
1
]
Topic: DMZ w/Public IPs (Read 2445 times)
DMZ w/Public IPs
« on: September 28, 2007, 17:28:54 »
seriousfix
Posts: 7
I can not find a tutorial on how to setup a DMZ with Public IPs. Can someone direct me to one, please? I believe I have tried everything to make a DMZ function and nothing.
Thanks.
Re: DMZ w/Public IPs
« Reply #1 on: September 28, 2007, 17:45:03 »
markb
Posts: 331
You need a filtered bridge, info can be found at.
http://doc.m0n0.ch/handbook/examples-filtered-bridge.html
Re: DMZ w/Public IPs
« Reply #2 on: September 28, 2007, 18:50:57 »
seriousfix
Posts: 7
Thank you a million times. I will do this now and report back.
Thanks again.
Re: DMZ w/Public IPs
« Reply #3 on: September 28, 2007, 21:54:57 »
seriousfix
Posts: 7
No luck yet. I even updated the firmware. Blah. I will get it monday.
Thanks again.
Re: DMZ w/Public IPs
« Reply #4 on: September 30, 2007, 07:39:55 »
Max2950
Posts: 120
I was wondering if there is a way to have the public IP exposed directly to the OPT interface? My ISP only allows me one IP.....
Re: DMZ w/Public IPs
« Reply #5 on: October 01, 2007, 00:54:28 »
cmb
Posts: 851
If you want public IP's on the DMZ, you either need to bridge if you only have one public subnet, or preferably get a /30 for your WAN and another block for your DMZ, routed to your WAN IP.
Max2950, please don't hijack other people's threads by posting an unrelated question. If you just have one IP, you have to forward ports (inbound NAT) as desired.
Pages: [
1
]
Topic: DMZ w/Public IPs