News
:
This forum is now permanently frozen.
m0n0wall Forum
>
m0n0wall Support (English)
>
Installation
Topic: ADSL, Zyxel and m0n0wall
Pages: [
1
]
Topic: ADSL, Zyxel and m0n0wall (Read 2880 times)
ADSL, Zyxel and m0n0wall
« on: October 20, 2007, 10:07:08 »
JaSeR
Posts: 2
Hi, i wish to use m0n0wall as my main router because I like Traffic shaping.
My network would be: ADSL - Zyxel Router - m0n0wall pc - switch - rest of pc
How I config the Zyxel router for indicate that all traffic go to m0n0wall?
Thanks and sorry for my bad english.
Re: ADSL, Zyxel and m0n0wall
« Reply #1 on: October 21, 2007, 02:54:39 »
bitonw
Posts: 79
may be better to have a look at the zyxel web site and look for bridge mode or a kind of dmz host...
but if you have a adsl modem why do you still want to use the zyxel? you can connect the adsl modem to the m0n0wall box...
Re: ADSL, Zyxel and m0n0wall
« Reply #2 on: October 21, 2007, 09:18:20 »
JaSeR
Posts: 2
I haven't adsl modem.
OK, so if I set DMZ to m0n0wall box works? Would I need to change subnet mask (255.255.255.0 to 255.255.0.0) for have:
ADSL ROUTER 172.26.0.1
m0n0wall LAN 172.26.0.2
m0n0wall WAN 172.26.1.1
PC's 172.26.1.x
or it's unnecessary?
Thanks.
Re: ADSL, Zyxel and m0n0wall
« Reply #3 on: October 24, 2007, 11:24:34 »
bitonw
Posts: 79
adsl router = adsl modem...
internet -> adsl 172.26.0.1 -> m0n0wall WAN 172.26.0.2 -> m0n0wall LAN 172.26.1.1 -> PC's (dhcp) 172.26.1.x
is fine. make sure that all those networks are /24 and NOT /16!!!
Pages: [
1
]
Topic: ADSL, Zyxel and m0n0wall