Firewall/NAT

I have just setup a rule to pass 443 traffic to an exchange server and my monowall is blocking the traffic.

Here is the rule I have set
TCP/UDP  *  *  192.168.200.13  443 (HTTPS)  NAT OWA   

I have tried just TCP as well.  I dont have any blocking rule above this one.

Here is a log of what I see
X  20:26:22.860569 WAN bc10730.xxxxx.com, port 3809 154.b185.xxxxx.net, port 443 TCP

Thanks for any help/insight you might provide!!

Which interface is the traffic coming in on?  If it is coming on the WAN interface, you would be better off deleting the rule and then setting up the incoming NAT amd letting it create the rule automatically.

Coming in on the WAN.

Port 80 traffic works perfectly.  Userrs get the message that they need to use the https, but then the 443 fails.

This was originally created by the nat, but I will give it a try and report back.

Well, I went a re-created the rule one more time and VIOLA it worked.  Dont understand what changed, but it does work now.

Thanks all