VPN

I'm trying to setup a vpn from home to the office.  Home computer is Vista and network is 192.168.2.0, office lan is 192.168.1.0.  When I connect, it looks like I successfully authenticate, but immediately disconnect during the "registering computer on network" phase.  I do have a firewall rule for the PPTP interface that should allow all traffic.  On monowall's log, I see:

Code:

[snip]
Feb 27 05:39:11 mpd: [pt0] CHAP: sending SUCCESS
Feb 27 05:39:11 mpd: [pt0] LCP: authorization successful
Feb 27 05:39:11 mpd: [pt0] LCP: phase shift AUTHENTICATE --> NETWORK
Feb 27 05:39:11 mpd: [pt0] setting interface ng1 MTU to 1400 bytes
Feb 27 05:39:11 mpd: [pt0] up: 1 link, total bandwidth 64000 bps
Feb 27 05:39:11 mpd: [pt0] IPCP: Up event
Feb 27 05:39:11 mpd: [pt0] IPCP: state change Starting --> Req-Sent
Feb 27 05:39:11 mpd: [pt0] IPCP: SendConfigReq #2
Feb 27 05:39:11 mpd: IPADDR 192.168.1.30
Feb 27 05:39:11 mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Feb 27 05:39:11 mpd: [pt0] CCP: Open event
Feb 27 05:39:11 mpd: [pt0] CCP: state change Initial --> Starting
Feb 27 05:39:11 mpd: [pt0] CCP: LayerStart
Feb 27 05:39:11 mpd: [pt0] CCP: Up event
Feb 27 05:39:11 mpd: [pt0] CCP: state change Starting --> Req-Sent
Feb 27 05:39:11 mpd: [pt0] CCP: SendConfigReq #2
Feb 27 05:39:11 mpd: [pt0] CCP: Checking whether 40 bits are enabled -> no
Feb 27 05:39:11 mpd: [pt0] CCP: Checking whether 56 bits are enabled -> no
Feb 27 05:39:11 mpd: [pt0] CCP: Checking whether 128 bits are enabled -> yes
Feb 27 05:39:11 mpd: MPPC
Feb 27 05:39:11 mpd: 0x01000040: MPPE, 128 bit, stateless
Feb 27 05:39:11 mpd: [pt0] LCP: rec'd Terminate Request #4 link 0 (Opened)
Feb 27 05:39:11 mpd: [pt0] LCP: state change Opened --> Stopping
Feb 27 05:39:11 mpd: [pt0] LCP: phase shift NETWORK --> TERMINATE
Feb 27 05:39:11 mpd: [pt0] setting interface ng1 MTU to 1500 bytes
Feb 27 05:39:11 mpd: [pt0] up: 0 links, total bandwidth 9600 bps
Feb 27 05:39:11 mpd: [pt0] IPCP: Down event
[snip]

Any ideas what may be wrong? 

Thanks.  -- Bud

I'm really scratching my head as I can connect from my desktop but not my laptop and both are running vista...

have you tried connecting with your laptop when your desktop is NOT connected.  You may well not be able to have them both connected at the same time.

CS...