News
:
This forum is now permanently frozen.
m0n0wall Forum
>
m0n0wall Support (English)
>
Firewall/NAT
Topic: RDP on opt1 interface
Pages: [
1
]
Topic: RDP on opt1 interface (Read 2845 times)
RDP on opt1 interface
« on: March 30, 2007, 22:28:25 »
phil67
Posts: 8
Hi
I’ve working with the soekris firewall. I’m using the OPT1 3rd interface bridged to the wan interface. Everything is working well but I can’t seem to RDP to a station on the OPT1 interface, unless I open the wan interface (any to any). If I have only port 3389 open I can’t get through.
Any ideas? There must be another port I need to open
Re: RDP on opt1 interface
« Reply #1 on: March 31, 2007, 20:54:09 »
cmb
Posts: 851
Quote from: phil67 on March 30, 2007, 22:28:25
I’m using the OPT1 3rd interface bridged to the wan interface. Everything is working well but I can’t seem to RDP to a station on the OPT1 interface
From where? WAN? LAN? Another OPT?
Re: RDP on opt1 interface
« Reply #2 on: April 05, 2007, 22:27:43 »
phil67
Posts: 8
Sorry I should have said. Yes from the wan.
Thanks
Re: RDP on opt1 interface
« Reply #3 on: April 05, 2007, 22:34:19 »
cmb
Posts: 851
You'll need a rule permitting it on the WAN interface. Are you seeing it getting dropped in the firewall log?
Re: RDP on opt1 interface
« Reply #4 on: April 05, 2007, 22:46:09 »
phil67
Posts: 8
Yes in the firewall log I see the ip that is trying to connect. It is trying to connect on three ports that seem to random in eg. 60457-60600 range. When I open those ports I can connect via rdp. I've played around with the nat rules but I can't make it work.
Thanks
Re: RDP on opt1 interface
« Reply #5 on: April 06, 2007, 01:36:21 »
cmb
Posts: 851
what's the rule you are using to permit this traffic?
You won't need any NAT configuration, only filtering is done over bridged interfaces.
Re: RDP on opt1 interface
« Reply #6 on: April 12, 2007, 01:12:29 »
phil67
Posts: 8
It's working now. I didn't set up the bridge correctly. It turns out it's in the manual.... agggh. Configuring a filtered bridge 14.3 - RTFM eh. Sorry
Pages: [
1
]