News: This forum is now permanently frozen.
linktree m0n0wall Forum  >  m0n0wall Support (English)  >  Installation
linktree Topic: How to install m0n0wall on Nortel Contivity 100
Pages: [1]
Topic: How to install m0n0wall on Nortel Contivity 100  (Read 1758 times)
« on: April 10, 2008, 17:30:46 »
alfrecoronel *
Posts: 4
Hi Folks.
i've been trying to install a m0n0wall generic PC on Nortel Contivity 100.
I got certain documentations about watchDog jumper J14 which i already disabled by cutting it; but still cannot get anything through serial console (9600, 8N1); if you guys have any clues about it. 

I installed a m0n0wall generic PC image in a CF that enables serial console, but still don't get anything. Please HELP...
« Reply #1 on: April 17, 2008, 20:31:41 »
deanlester *
Posts: 11
Ya, I never got anything off the console port either.

Good thing it'll work pretty much out of the box with a fresh m0n0 generic-pc image. It'll set up a DHCP address from the inside LAN for your PC, and you can configure it from there.

Watch the temperatures of the Contivity. I had to upgrade mine with a couple extra fans. Eventually it got too loud and I replaced it with a Nokia IP120, but that's another story.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines