m0n0wall Forum - Problem with Alix 2c0

« on: May 15, 2008, 06:08:54 »

mgrove

Posts: 7

I am having problems setting up monowall. I have an alix2c0 board that has two nics.

I am using the wrap image v1.233.

I am having a couple problems:

* DHCP does not seem to be working.

* I am unable to access the web interface using the default LAN IP address (192.168.1.1)

* I attempted to connect using hyperterminal and was able to view the boot up sequence, but am unable to type in an option number once I get to the menu. Perhaps I am using a cable that is not wired properly?

I have seen multiple postings where people are encouraged to upgrade to one of the beta images. Should I do this as well?

I have attached the output from the boot process as a text file.

output.txt (3.31 KB - downloaded 175 times.)
« Last Edit: May 15, 2008, 06:16:49 by mgrove »

Re: Problem with Alix 2c0

« Reply #1 on: May 15, 2008, 18:27:12 »

Manuel Kasper
Administrator

Posts: 364

The 1.2x images don't work on ALIX boards; please use 1.3b11 instead. I've added a note about this to the download page so people won't have to ask about this in the future.

Re: Problem with Alix 2c0

« Reply #2 on: May 16, 2008, 16:52:03 »

mgrove

Posts: 7

That did the trick. Everything is working now.

Thanks!

Re: Problem with Alix 2c0

« Reply #3 on: July 15, 2008, 02:19:05 »

mgrove

Posts: 7

It appears my problem has resurfaced with the same symptoms. This time it occurs using both the 1.3b11 and 1.3b13 images.

I am not sure what has changed. Everything was working fine. For awhile the board sat powered down in a closet and when I went to use it again it does not work.

Very strange...

UPDATE: Switched to a different computer and now able to enter menu options. Is now configured and working like a champ.


« Last Edit: July 16, 2008, 17:15:35 by mgrove »

Pages: [1]