News: This forum is now permanently frozen.
Pages: [1]
Topic: Alix.2c3 Install Problem  (Read 2021 times)
« on: May 21, 2008, 03:06:03 »
guyerjp *
Posts: 9

Having some problems installing 1.3b11 onto my new Alix.2c3 board. I have put the WRAP/Alix image onto the CF card using the method in the screencast, but when I start it up and try to set it up using the null modem cable I get the following:  http://farm3.static.flickr.com/2225/2509404441_c491ede207_o.jpg When I use the generic-pc version everything works fine, but I would like to have the optimized version of m0n0wall on my board. Any ideas would be greatly appreciated and I will answer any questions you have about the set up.
« Reply #1 on: May 28, 2008, 05:15:57 »
guyerjp *
Posts: 9

I finally figured out the problem after digging through the Alix manual. The baud had to be changed to 38400. This needs to be changed in the installation documentation since it's specific to the Alix boards.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines