News: This forum is now permanently frozen.
Pages: [1]
Topic: Very easy config---  (Read 1529 times)
« on: August 06, 2008, 15:48:10 »
dparaje *
Posts: 1

hi all.
i have a problem and i hope someone could help me.
I have a DSL conection with only 1 ip address.
I need to configure my monowall as an end-tunnel VPN PPTP.
i have configured in my router an port-nat of the 1723 to the monowall.
the monowall only have LAN interface: ip 172.16.0.150
Server: 172.16.0.151 and the pool 172.16.0.192
the router is 172.16.0.1

Localy, in the lan I have configured the XP VPN to work.. and its fine, works... no problem
When I try to do the same via internet I receive an error, cant find server...
i look at the logs, FW Log, and appears a line like this one:

FIREWALLED   LAN . 88.2.233.23:33232 to 172.16.0.150:1723
it seems like the router is doing well the NAT but the packets comes to the monowall via LAN and its fail.
I have rules in LAN;WAN AND PPTP * * * * PASS (all open) but it continues crashing...

Am I Doing something wrong..??
anyone can help me and guide me to the config correct??

llitle draw...

Router (NAT 1723 to monowall 1723)             
|
|
---------------- LAN
|          |
|          |
PCs      MONOWALL



thanks in advance---
david
« Reply #1 on: August 07, 2008, 10:16:05 »
markb ****
Posts: 331

You also need to pass GRE traffic to the Monowall.  Depending on your DSL router, you may have more luck putting the Monowall box between the DSL modem and the LAN and then setting the Monowall as a DMZ destination for all traffic from the router.  You might need to have a play with the config of the firewall on the Laptop depending on what software you are using.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines | Forum style designed by PixelSlot