News: This forum is now permanently frozen.
linktree m0n0wall Forum  >  m0n0wall Support (English)  >  Installation
linktree Topic: HELP with my monowall setup
Pages: [1]
Topic: HELP with my monowall setup  (Read 1799 times)
« on: August 18, 2008, 11:04:06 »
techn0craft *
Posts: 1
guys..i need your inputs here as i am totally confused im using PPPoE connected to a speedtouch modem (globelines isp here in the phils) and im setting up a basic firewall for my LAN..do i have to enable my router/modem into bridge mode and let m0n0wall control the connection? what if i will  leave the routing stuff to my modem and let the m0n0 act as purely a firewall what configuration do i need to do on the WAN interface GUI?

my internet diagram :

internet -> modem (10.0.0.138) -> m0nobox ( LAN : 192.168.1.254 configure my WAN to use static IP and use WAN : 10.0.0.1/22 Gateway : 10.0.0.138)...is this setup correct and il point my clients to 192.168.1.254 as the gateway?

thanks for the inputs guys.
« Reply #1 on: August 18, 2008, 16:29:47 »
Uluen **
Posts: 59
Is there any reason why you don't want your modem in bridged mode?

My modem is bridged and it makes it much easier to configure IMO, I only have one device to configure.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines