Not reproducible

Hi,

Im using 1.3b13  with alix board. Having no luck with pppoe.  The service works well configured with pfsense.
Below is the handshake log. Can anybody help?



Jan 1 08:40:05    mpd: [pppoe] PPPoE: Connecting to ''
Jan 1 08:40:06    mpd: PPPoE: rec'd ACNAME "XXXXXX"
Jan 1 08:40:06    mpd: [pppoe] PPPoE: connection successful
Jan 1 08:40:06    mpd: [pppoe] link: UP event
Jan 1 08:40:06    mpd: [pppoe] link: origination is local
Jan 1 08:40:06    mpd: [pppoe] LCP: Up event
Jan 1 08:40:06    mpd: [pppoe] LCP: state change Starting --> Req-Sent
Jan 1 08:40:06    mpd: [pppoe] LCP: SendConfigReq #17
Jan 1 08:40:06    mpd: MRU 1492
Jan 1 08:40:06    mpd: MAGICNUM c0c24bb7
Jan 1 08:40:06    mpd: [pppoe] LCP: rec'd Configure Request #1 (Req-Sent)
Jan 1 08:40:06    mpd: MRU 1492
Jan 1 08:40:06    mpd: AUTHPROTO PAP
Jan 1 08:40:06    mpd: MAGICNUM 0bf0d616
Jan 1 08:40:06    mpd: [pppoe] LCP: SendConfigAck #1
Jan 1 08:40:06    mpd: MRU 1492
Jan 1 08:40:06    mpd: AUTHPROTO PAP
Jan 1 08:40:06    mpd: MAGICNUM 0bf0d616
Jan 1 08:40:06    mpd: [pppoe] LCP: state change Req-Sent --> Ack-Sent
Jan 1 08:40:07    mpd: [pppoe] LCP: rec'd Configure Ack #17 (Ack-Sent)
Jan 1 08:40:07    mpd: MRU 1492
Jan 1 08:40:07    mpd: MAGICNUM c0c24bb7
Jan 1 08:40:07    mpd: [pppoe] LCP: state change Ack-Sent --> Opened
Jan 1 08:40:07    mpd: [pppoe] LCP: auth: peer wants PAP, I want nothing
Jan 1 08:40:07    mpd: [pppoe] PAP: using authname "xxxxxxxxxxxx"
Jan 1 08:40:07    mpd: [pppoe] PAP: sending REQUEST len:22
Jan 1 08:40:07    mpd: [pppoe] LCP: LayerUp
Jan 1 08:40:07    mpd: [pppoe] PAP: rec'd NAK #1
Jan 1 08:40:07    mpd: MESG: Request Denied
Jan 1 08:40:07    mpd: [pppoe] LCP: authorization failed
Jan 1 08:40:07    mpd: [pppoe] LCP: parameter negotiation failed
Jan 1 08:40:07    mpd: [pppoe] LCP: state change Opened --> Stopping
Jan 1 08:40:07    mpd: [pppoe] AUTH: Cleanup
Jan 1 08:40:07    mpd: [pppoe] LCP: SendTerminateReq #18
Jan 1 08:40:07    mpd: [pppoe] LCP: LayerDown
Jan 1 08:40:07    mpd: [pppoe] LCP: rec'd Terminate Ack #18 (Stopping)
Jan 1 08:40:07    mpd: [pppoe] LCP: state change Stopping --> Stopped
Jan 1 08:40:07    mpd: [pppoe] LCP: LayerFinish
Jan 1 08:40:07    mpd: [pppoe] link: DOWN event
Jan 1 08:40:07    mpd: [pppoe] link: reconnection attempt 9
Jan 1 08:40:07    mpd: [pppoe] LCP: Down event
Jan 1 08:40:07    mpd: [pppoe] LCP: state change Stopped --> Starting
Jan 1 08:40:07    mpd: [pppoe] LCP: LayerStart
Jan 1 08:40:07    mpd: [pppoe] pausing 6 seconds before open
Jan 1 08:40:13    mpd: [pppoe] PPPoE: Connecting to ''


thanks

Hi,

I'm using it also, except my provider wants chap and not pap. This works flawlessly
Are you sure that the login parameters are ok?

Klaus

(I don't think this should be posted in bug reports.)

These two lines:

Code:

mpd: MESG: Request Denied
mpd: [pppoe] LCP: authorization failed

makes me think you have the wrong password and/or username.

I think it's pretty common to have user name like this: username@domain.net, not just username.

Before you post here:

If you're thinking about posting a bug report here, please be very sure that you've configured everything properly and that the only logical explanation left for your problem is a bug in m0n0wall.

If you're simply not sure how to use m0n0wall in a particular situation, or whether it will work in that situation at all, post your question(s) in the other boards first. Otherwise, your post may be deleted.

Please make sure to include the following information in your bug report:


m0n0wall version(s) that you use
hardware details (type/make of NICs etc.) if relevant
software versions of other components that may be relevant to your problem (browser, operating system, etc.)
all the steps needed to reproduce the problem

Hi,

 Yes I understand that it would seem to be a wrong username password problem and not a bug, however, i did install pfsense in the same alix unit using the same password and username. and the provider accepted the account. Repeated this with monowall and again it was not accepted by the ISP.  Did this more than 3 times now. This is what bothers me?? Is there anyhing unique in the handshake that can causes the authentication failure in monowall?

thanks for your comments.

below is the syslog from pfsense

Aug 22 09:05:36    mpd: MRU 1492
Aug 22 09:05:36    mpd: MAGICNUM 403476a1
Aug 22 09:05:36    mpd: MRU 1492
Aug 22 09:05:36    mpd: MAGICNUM 403476a1
Aug 22 09:05:38    mpd: MRU 1492
Aug 22 09:05:38    mpd: AUTHPROTO PAP
Aug 22 09:05:38    mpd: MAGICNUM 0e142be9
Aug 22 09:05:38    mpd: MRU 1492
Aug 22 09:05:38    mpd: AUTHPROTO PAP
Aug 22 09:05:38    mpd: MAGICNUM 0e142be9
Aug 22 09:05:38    mpd: IPADDR 0.0.0.0
Aug 22 09:05:38    mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug 22 09:05:38    mpd: SECDNS 0.0.0.0
Aug 22 09:05:38    mpd: IPADDR xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: 202.78.96.98 is OK
Aug 22 09:05:38    mpd: IPADDR xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Aug 22 09:05:38    mpd: IPADDR 0.0.0.0
Aug 22 09:05:38    mpd: SECDNS 0.0.0.0
Aug 22 09:05:38    mpd: IPADDR xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: xxx.xxx.xxx.xxx is OK
Aug 22 09:05:38    mpd: SECDNS xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: IPADDR xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: SECDNS xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: IPADDR xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: SECDNS xxx.xxx.xxx.xxx
Aug 22 09:05:38    mpd: xxx.xxx.xxx.xxx -> xxx.xxx.xxx.xxx
Aug 22 09:05:41    check_reload_status: rc.newwanip starting
Aug 22 09:05:43    php: : Informational: rc.newwanip is starting wan.
Aug 22 09:05:43    php: : rc.newwanip working with (IP address: xxx.xxx.xxx.xxx) (interface: wan) (interface real: ng0).
Aug 22 09:05:48    php: : Informational: DHClient spawned /etc/rc.newwanip and the new ip is wan - xxx.xxx.xxx.xxx.
Aug 22 09:05:48    php: : Creating rrd update script
Aug 22 09:05:48    php: : Configuring slbd
Aug 22 09:05:49    check_reload_status: reloading filter
Aug 22 09:05:53    sshlockout[11231]: sshlockout starting up
Aug 22 09:05:53    sshlockout[11231]: sshlockout starting up
Aug 22 09:05:55    login: login on console as root
Aug 22 09:06:01    check_reload_status: updating dyndns

Oh Yes forgot to mention

Th unit is a  ALIX.2C3 System Board with an atheros minipci wifi. installed the wrap-1.3b13.img using physdiskwrite.exe.
Checksum was correct.

ajg