Hardware

Hello,

I am trying to get a set of Soekris net4801s set up with Monowall v1.235.  I have done this many times in the past with no problem, but this time all five of the net4801s I am trying to load will not boot.  I am certain that the 1.235 image was successfully written to the CF cards, and I used an IMG file that I know I have successfully used before.

When I connect via serial to observe the boot process I get the following:

Code:

POST: 012345689bcefghipsajklnopqr,,,tvwxy


comBIOS ver. 1.33  20080103  Copyright (C) 2000-2007 Soekris Engineering.

net4801

0128 Mbyte Memory                        CPU Geode SC1100 233 Mhz

Pri Mas  CF CARD 4GB                     LBA Xlt 977-128-63  3940 Mbyte

Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int
-------------------------------------------------------------------
0:00:0 1078 0001 06000000 0107 0280 00 00 00 00000000 00000000
0:06:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0000000 10
0:07:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0001000 10
0:08:0 100B 0020 02000000 0107 0290 00 3F 00 0000E301 A0002000 10
0:18:2 100B 0502 01018001 0005 0280 00 00 00 00000000 00000000
0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11

 1 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.
Console: internal video/keyboard
BIOS drive C: is disk0
BIOS 639kB/130048kB available memory

FreeBSD/i386 bootstrap loader, Revision 0.8
(root@fb411.neon1.net, Sun May  8 12:15:29 CEST 2005)
can't find '/kernel'
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
can't load 'kernel'
can't load 'kernel.old'

Type '?' for a list of commands, 'help' for more detailed help.
ok

At that point, it just sits there.

Any thoughts?  Maybe these are a new revision of the net4801 hardware that isn't compatible with Monowall?