Services

I click on Services: DHCP Server then Wireless (Optional 1 interface) and select the "Enable IPv4 DHCP server on Wireless interface" option. I insert the IP range that I want this interface to hand out and select save. When I do so, I get a IPV6 warning.

The following input errors were detected:

    * The field 'IPv6 Range begin' is required.
    * The field 'IPv6 Range end' is required.

I don't see an option for IPV6 (and I'm not running it.)

Xl0 - WAN
Xl1 - LAN - 10.11.12.1 (10.11.12.0/28)
fxp0 - Wireless LAN - 10.11.13.1 (10.11.13.0/28)

I have a Linksys Wireless AP connected to a Cisco switch and the IP of the AP is 10.11.13.2. I added a hardwired system to the switch with the IP of 10.11.13.3 and it can pin the AP, but can't ping the fxp0 interface (10.11.13.1).

I've tried adding firewall rules to allow Wireless to ping any, but nothing works. can anyone assist me in this?

Michael

I unchecked the enable IPV4 on the LAN interface, saved it and tried re-enabling it and it now says the samething.

Michael

I had to reset the firewall from scratch to get DHCP on the m0n0wall to be re-enabled.

Not sure if it's a bug or a known bug. I'll look and see on the forum. Anyone else having this issue?

Michael

Should've looked a little more.

http://forum.m0n0.ch/index.php/topic,2991.0.html

Michael