Firewall/NAT

Hi there,

I have a problem with Inbound NAT setting.

I currently use version 1.3b16.

My objective is, WAN to LAN inbound NAT for public web server.
I have already set..
1) Server NAT with one of my External IP address XXX.XXX.XXX.232 (not same as interface WAN address XXX.XXX.XXX.231).
2) Proxy ARP for XXX.XXX.XXX.232.
3) Inbound NAT to pass XXX.XXX.XXX.232:443 to my internal web server with port 443. And generate automatically Firewall Rule for this NAT.

Then, I tried access https://XXX.XXX.XXX.232, but not respond.
Nothing firewall Logs are logged.
Additionally, the internal web server is running properly because another Firewall with version 1.232 is working fine with this internal web server.

Also, I have tried to change the inbound NAT settings from XXX.XXX.XXX.232 to XXX.XXX.XXX.231(interface address). In this case, the web page is shown properly.
The address XXX.XXX.XXX.232 is already public, so I would NOT like to that IP address.
Is there any changes from 1.232 to 1.3b16 around this NAT?
Could anyone advice or suggestion??

Regards,

Hello,

I found this messages: http://forum.m0n0.ch/index.php/topic,2081.0.html
This may be also hint for my case.

But I have not router administrative privilege. So I have to wait something..

Hello,

BINGO.
ARP Cache was the point, as same that thread.