Bug Reports

I upgraded from 1.13b15 to 1.13b16 today, and the upgrade broke my DHCP setup.

I have 4 networks configured in addition to WAN.
One of those is a Wlan with an atheros abg card.
My hardware is a Soekris 5501 and I use the Generic PC image.

All 4 networks have DHCP enabled and their own ranges.
Interface0:LAN = 10.0.0.1 to 10.0.0.254    DHCP range: 10.0.0.100 to 10.0.0.199
Interface1:WAN = DHCP to ISP
Interface2:Rental = 192.168.3.0 to 192.168.3.254    DHCP range: 192.168.3.100 to 192.168.3.199
Interface3:DMZ = 192.168.4.0 to 192.168.4.254    DHCP range: 192.168.4.100 to 192.168.4.199
Interface4:Wlan = 192.168.5.0 to 192.168.5.254    DHCP range: 192.168.5.100 to 192.168.5.199

DHCP works on my Rental interface, but not on my Wlan or LAN interface. Did not test DMZ.

This error is on the log:
kernel: arplookup 169.254.114.194 failed: host is not on local network

This worked on V 1.13b15 so I think my config is OK, and I haved used this config on many different versions.

Any clues?

EDIT: Went back to b15, and DHCP works again on all interfaces.

DHCP log:
Jul 5 22:31:44    dhcpd: DHCPACK to 192.168.5.199 (00:1d:e0:45:9e:61) via ath0
Jul 5 22:31:44    dhcpd: DHCPINFORM from 192.168.5.199 via ath0
Jul 5 22:31:44    dhcpd: DHCPACK to 192.168.5.199 (00:1d:e0:45:9e:61) via ath0
Jul 5 22:31:44    dhcpd: DHCPINFORM from 192.168.5.199 via ath0
Jul 5 22:31:41    dhcpd: DHCPACK on 192.168.5.199 to 00:1d:e0:45:9e:61 (PC1) via ath0
Jul 5 22:31:41    dhcpd: DHCPREQUEST for 192.168.5.199 from 00:1d:e0:45:9e:61 (PC1) via ath0
Jul 5 22:31:41    dhcpd: DHCPACK on 192.168.5.199 to 00:1d:e0:45:9e:61 (PC1) via ath0
Jul 5 22:31:41    dhcpd: DHCPREQUEST for 192.168.5.199 from 00:1d:e0:45:9e:61 (PC1) via ath0
Jul 5 22:28:40    dhcpd: DHCPACK on 10.0.0.199 to 00:06:dc:41:e7:00 via vr0
Jul 5 22:28:40    dhcpd: DHCPREQUEST for 10.0.0.199 (10.0.0.1) from 00:06:dc:41:e7:00 via vr0
Jul 5 22:28:40    dhcpd: DHCPOFFER on 10.0.0.199 to 00:06:dc:41:e7:00 via vr0
Jul 5 22:28:39    dhcpd: DHCPDISCOVER from 00:06:dc:41:e7:00 via vr0

I tried to reproduce this problem today (although only on a box with 3 interfaces in total), but DHCP worked fine for me on two interfaces (LAN/OPT1) at the same time. Can you post your (anonymized) config, please?

I've attached an anonymized config file.

Removed some FW rules etc. and anonymized anything I thought could be abused. Config looks more 'open' than it really is  because of those rules that had to go

I currently use V 1.3b15 as that works for me with DHCP...