News: This forum is now permanently frozen.
Pages: [1]
Topic: Block All Rule Not Working on IPSec VPN  (Read 2240 times)
« on: July 15, 2009, 13:56:03 »
CableGuy *
Posts: 2

I setup an IPSec VPN and configured the firewall rules under IPSec VPN (obviously  Grin).

While I was testing I found I was able to, for this example, ping a particular server that I didn't remember setting an allow rule for. I checked the firewall and I was correct, there was no Allow ICMP rule from the server I was on to the other that I was successfully pinging and the default Block All rule should, as the name suggests, have blocked it but it wasn't  Shocked.

To test I moved the Block All rule from the bottom, right to the very top which should have blocked ALL VPN traffic but the ping continued to work and so did other traffic.

Has anybody come across this before? Any help would be massively appreciated.

BTW - I'm using Version 1.3b14

Thanks

Adam
« Reply #1 on: July 15, 2009, 17:03:50 »
oelki *
Posts: 23

Have you changed the rules when  the ping was still pinging?
« Reply #2 on: July 15, 2009, 17:26:44 »
CableGuy *
Posts: 2

Actually as a sanity check I did both i.e. ran a continuous ping when I changed the rules and also stopped the ping changed the rules and started a fresh ping. I also reset the state table and it still made no difference.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines