News: This forum is now permanently frozen.
Pages: [1]
Topic: configuring SNMP Traps b/t to pass through two monowalls  (Read 2203 times)
« on: August 05, 2009, 08:34:59 »
veracruz *
Posts: 3

I'm implementing a network monitoring solution server  for my organization...I'm facing trouble with configuring SNMP Traps to pass from one of my remote monowall box lan interface to another monobox and then to my NMS server....I've configured all the SNMP community strings correctly..n ...also when I initiate a SNMP walk from my NMS server to the remote mono box..I could see the SNMP source traffic in the firewall states but not the return traffice....any help would be greatly appreciated
« Reply #1 on: August 28, 2009, 20:35:02 »
dbogdan@lumc.edu *
Posts: 14

you should be able to do this easily by allowing the ip addresses of the devices access in and out of the monowall box.  Are these public addresses or private addresses?  If you are natting, then you may have to allow the ports through from the original nat address to the other.  Not sure how your trap server is going to discern what is what though cause everything will come through as the natted address.

Hope that helps!

Dave
« Reply #2 on: October 28, 2009, 09:58:50 »
veracruz *
Posts: 3

thanks dave...sorry for the late reply....seems to be working now..
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines