News
:
This forum is now permanently frozen.
m0n0wall Forum
>
m0n0wall Support (English)
>
VPN
Topic: Monowall VPN And Routing
Pages: [
1
]
Topic: Monowall VPN And Routing (Read 3065 times)
Monowall VPN And Routing
« on: September 02, 2009, 16:34:59 »
seaquest30
Posts: 6
Hi all,
I have two separated network in two different WAN.
To symplify the topology, I'll called my main Network WAN1 and my Distribution network WAN2
Actualy WAN1 and WAN2 are VPN connected with a IPSec VPN. My WAN1 is a Cisco 1841 and my WAN2 is a Monowall PC. It's working weel. But Now I have to make many big change in my booth network and I want to put the VPN Link beween the booth network into a Monowall box on each side.
So first, I have setup two Monowall Box on each side.
WAN1 -> INTERNET <- WAN2
IPSec Tunnel
WAN1
---------
192.168.1.1/30 LAN |MONO| WAN X.Y.Z.10/28
WAN2
----------
Y.Z.X.148/24 WAN |MONO| LAN 192.168.1.5/30
For the WAN1 LAN interface, my main router have a 802.1Q Sub-Int with 192.168.1.2/30 and ping cleary 192.168.1.5.
But I can't route any other subnet into this tunnel.
Why?
Best Regards
Martin
Re: Monowall VPN And Routing
« Reply #1 on: September 02, 2009, 16:38:49 »
seaquest30
Posts: 6
LOLLLLLLL
15.26. How can I route multiple subnets over a site to site IPsec VPN?
Ok, too easy
Thanks for read me
Martin
Re: Monowall VPN And Routing
« Reply #2 on: September 02, 2009, 16:45:49 »
seaquest30
Posts: 6
Hi again,
I know it's very bizz what I will ask but what will happened if I set the remote Subnet at 0.0.0.0/0??? in the IPSec Remote subnet field?
Pages: [
1
]