News
:
This forum is now permanently frozen.
m0n0wall Forum
>
m0n0wall Support (English)
>
Hardware
Topic: Not able to activate LAN controllers
Pages: [
1
]
Topic: Not able to activate LAN controllers (Read 1886 times)
Not able to activate LAN controllers
« on: June 14, 2010, 20:00:00 »
Alexander001
Posts: 5
Hi
I have a new Soekris net5501 box and a Ultra SanDisk CompactFlash 4 Gb memory. When I try to use Hyperterminal to activate/configure which LAN devices I what to use but Hypertermail only reply this output:
üüþŽíènvÎ i‰û‰ú‰ú‰úOIOOOIIIOOOOOIIOIOOOOIIOIIIIOOIIOIOOOOIIOOIOI
Hyperterminal properties are (as recommended) 9600 8-N-1. All other setting are default (as far as I know). I have tried several pc and several images (emb 1.31 and emb 1.32). Please advice.
Re: Not able to activate LAN controllers
« Reply #1 on: June 14, 2010, 20:04:57 »
rpsmith
Posts: 113
This area is for reporting Bugs not hardware/user problems.
http://forum.m0n0.ch/index.php/topic,6.0.html
Roy...
Re: Not able to activate LAN controllers
« Reply #2 on: June 14, 2010, 20:09:02 »
Alexander001
Posts: 5
Sorry for this mistake. Do you know how to move this topic to hardware/user problems? I have try several CompactFlash memory card. I have also configured another Soekris box which is working fine. Alexander
Re: Not able to activate LAN controllers
« Reply #3 on: June 14, 2010, 20:17:42 »
rpsmith
Posts: 113
Sounds like the Soekris serial port is set to a different speed than your Hyperterminal. I think the default hardware baud rate for the net5501 is 19200. Also, even without a CF installed, you should see some Soekris BIOS information displayed.
Roy...
«
Last Edit: June 14, 2010, 23:39:02 by rpsmith
»
Re: Not able to activate LAN controllers
« Reply #4 on: June 15, 2010, 12:33:04 »
Alexander001
Posts: 5
Setting Hyperterminal speed to 19200 solved this problem.
Thank you very much for all help Roy
Re: Not able to activate LAN controllers
« Reply #5 on: June 15, 2010, 13:23:49 »
rpsmith
Posts: 113
glad you got it working.
Roy...
Pages: [
1
]