News: This forum is now permanently frozen.
linktree m0n0wall Forum  >  m0n0wall Support (English)  >  Hardware
linktree Topic: mono on PcEngines Axis 3D Configuring WAN Interfaces does not work
Pages: [1]
Topic: mono on PcEngines Axis 3D Configuring WAN Interfaces does not work  (Read 1869 times)
« on: June 15, 2010, 15:16:37 »
b00n07 *
Posts: 7
Hey guys,
i try to install monowall on PcEngines Axis 3D, booting from cf with the generic-pc-1.32.img works, booting the embedded-1.32.img doesn't work, it says something with acpi failed...

So after booting generic-pc-1.32 it configures firewall and lan, but when it gets to wan interface it just stops doin nothin anymore. if i press a button i get following message:
"ACPI-0800: ***Error: AcpiEvGpeDispatch: No handler or method for GPE[1F], disabling event"

just don't know what to do, hope you can help me.

greetz b00n07

ps: sorry for bad english
« Reply #1 on: June 17, 2010, 10:31:13 »
brushedmoss ****
Posts: 446
what is your power management setting in your BIOS , try changing it to APM if possible
« Reply #2 on: June 21, 2010, 15:54:22 »
b00n07 *
Posts: 7
have fixed the problem already, changed something in bios.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines