m0n0wall Forum - port pass through firewall/NAT issue

I am having an issue with my firewall/NAT rules. I have an AT&T (Bellsouth) dsl account with 5 static IP addresses, the modem is PPPoE with m0n0wall and that is working great. We are also running the captive portal inside the network. I have created the MAC pass through rules for a device and then went into the firewall/NAT rules and set it to pass traffic through on port 80 from (1) one of the static IP addresses to the internal device. And we are getting no results we are seeing the traffic come in but we are getting any results.

FIREWALL LOG:
BLOCK    11:29:05.472311      LAN      172.16.52.161, port 2860      255.255.255.255, port 30303      UDP
BLOCK    11:29:03.460321    LAN     172.16.52.161, port 4428    172.16.52.250, port 53    UDP
ALLOW    11:29:01.317276    WAN    216.253.XXX.XX6, port 21923    172.16.52.161, port 80    TCP

Any help would be great.