News: This forum is now permanently frozen.
linktree m0n0wall Forum  >  m0n0wall Support (English)  >  Firewall/NAT
linktree Topic: Allow traffic through different subnets
Pages: [1]
Topic: Allow traffic through different subnets  (Read 2490 times)
« on: November 26, 2010, 11:06:17 »
chris86 *
Posts: 1
Hi

I am quite new to all of this and wasn't sure what to look for. I just installed M0n0wall and configured it with the following interfaces

WAN: Public IP from DHCP
LAN: 192.168.10.0/24
OPT1: 192.168.1.0/24

How can I allow traffic between LAN and OPT1 so they can talk to each other?

Thanks a lot for your help
« Last Edit: November 26, 2010, 11:52:13 by chris86 »
« Reply #1 on: November 26, 2010, 16:11:40 »
gus *
Posts: 27
under firewall rules for the LAN, make a rule to allow all traffic, source is 192.168.10.0/24 and destination is 1.0/24.

Do the same on the OPT1 with the appropriate IP's.

I can provide a screenshot if needed.
« Reply #2 on: December 16, 2010, 22:22:23 »
KingSix *
Posts: 1
What if its not working?
« Reply #3 on: December 26, 2010, 03:14:31 »
notladstyle **
Posts: 53
by default, LAN has * to * rule, apply the same rule to the opt1 and they can talk to each other.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines