VPN

i can connect to my vpn and yet i cant get any resources on my lan,

lan
192.168.3.1

server address

192.168.3.0

remote address
192.168.2.0

i dont have a server per say i am using m0n0wall as my server and it is located at 192.168.3.1 so are my settings correct

when i connect i am given a lap ip address of 192.168 2.5

just cant reach any lan computers or anything

any help would be appreciated

try setting your PPTP server to:192.168.3.63 and your remote address range to: 192.168.3.64.

also, make sure you have a PPTP interface rule to allow traffic to pass.

Roy...

You don't provide the netmasks you are using with 192.168.3.0 and 192.168.2.0, and it a bad idea to make assumptions. But it is more than possible that you are using a 24 bit netmask here and that makes the two IPs you list network addresses. And these are generally never used for individual devices.

You don't provide the netmasks you are using with 192.168.3.0 and 192.168.2.0, and it a bad idea to make assumptions. But it is more than possible that you are using a 24 bit netmask here and that makes the two IPs you list network addresses. And these are generally never used for individual devices.

im not following what your saying..... i put in what i had in my server pptp settings..i can connect and get a assigned ip address but no local traffic

and yes i am using a /24 from the drop down

what should the settings be set to?