Firewall/NAT

Hi.  I want to setup an FTP server, so I downloaded FZ.  Installed, configured, then went to m0n0 and set it up.  I set FZ to use 6000-6050 for passive.  My FTP box sits on a 10.x private LAN, with IP 10.0.0.201.  M0n0 has two interfaces; LAN on the 10.x and WAN with a public address.  I have a 13 IP block and m0n0 proxy ARPs the ones I use with NAT, so I have 184.51.192.110 on proxy ARP and it's also listed in Server NAT. 

I setup the NAT like this
..and the rules like this.
This is the FileZilla configuration

FZ has * set for binding and no IP filter.  Doesn't work though, I don't even get a banner.  I don't see FZ console responding to anything, so it's like m0n0 isn't passing the NAT.  However, I also have RDP setup in NAT to send 3389 from 184.51.192.110 to 10.0.0.201 and that works perfectly fine.   

??

try using 1:1 NAT for your FTP server instead of Server NAT and see if that helps.  everything else looks good unless I missed something.

BTW, did you make any changes to your Default LAN rule (other than Allowing fragmented packets) ?

Roy...

Looks like you don't need to put external IP in m0no NAT rules if you have configured it in Filezilla server.

I just configured my m0n0 with dynamic IP like that (see attach):

Filezilla configuration was wrong, at least in my conditions "Retrieve external IP from..." not working correctly with my hostname, instead of this I use "IP address" field for entering my dynamic IP via hostname (no-ip service no-ip.com).
Previous configuration causes some clients like FAR manager FTP plugin to use internal IP, but most of native ftp clients are working flawessly.
See attach for right confguration.