Firewall/NAT

Hi all,

i have added a new subnet 10.100.0.0 to my network 10.42.0.0 - so to speak connected to the LAN-interface side of my monowall.

Then i added a static route to this new subnet with the result that i can connect from 10.42.xx.xx to 10.100.xx.xx but NOT from 10.100.xx.xx to 10.42.xx.xx.

OK the LAN IP of my monowall is in the 10.42. - subnet so i expected that a LAN-Firewall rule is needed.

-> If i add a firewall rule and click apply i additionally have to restart my monowall 1.33 - otherwise it never get's active.

-> The Rule connects Interface "LAN" Network "10.100.0.0 /16" "ANY" to "10.42.0.0 /16" "ANY" ...


Result ... i can now reach the monowall from the new subnet - ping or open the configuration by http but i still can't access other computers or servers. Monowall is my gateway so it should connect these two networks.

If i for example try to connect 10.42.10.16 by MSTSC - i can see in log that port 3389 is blocked.

So any help apreciated what can go wrong here ...

Thanks Michael