Hardware

Has anybody had any luck installing m0n0wall on the X Core E-Series fireboxes?

I read on pf forum that it works, but figured I would check here, because I use m0n0, not pf.

UPDATE 2011-12-06: I decided that if PF works I will give it a try. I took the plunge and bought one on ebay. I found one for $100. I will update after I get it and try it.

UPDATE 2011-12-16: Installed m0n0wall generic-pc-serial-1.8.0b478.img to CF and put in x550e and it booted right up. Configured interfaces, rebooted and I was able to access m0n0wall web interface. I then restored my backup config file and everything is working.

Every once in a while during the bootup I get the following error.

Fatal trap 30: reserved (unknown) fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer     = 0x20:0xc08a3220
stack pointer           = 0x28:0xc3420d5c
frame pointer           = 0x28:0xc3420d60
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, IOPL = 0
current process         = 0 (swapper)
trap number             = 30
panic: reserved (unknown) fault
cpuid = 0
Uptime: 1s