News: This forum is now permanently frozen.
Pages: [1]
Topic: Full NAT  (Read 1203 times)
« on: March 25, 2013, 18:04:18 »
janosh *
Posts: 2

We have an external webhoster which connects to our firewall, then by NAT gets routed into a VPN connection to an other office so it can access some internal web services there.

Currently we are using Astaro Gateway. There is DNAT (Destination), SNAT (Source) and FullNAT (Source and Destination are defined). We could only make it work by using Full NAT, so when the Request from the external Hoster arrives at the firewall, it gets redirected through the VPN tunnel and looking as if the source IP would be the Firewall's internal IP = Source.

Is M0n0wall able to provide FullNAT as well?

tks
« Reply #1 on: May 03, 2013, 21:38:23 »
Lee Sharp *****
Posts: 517

This is a term question, not a technicle question.  "FullNAT" is not an IEEE defined standard.  We do, however, support server NAT and 1 to 1 NAT, and one of those may be what you need.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines