News
:
This forum is now permanently frozen.
m0n0wall Forum
>
m0n0wall Support (English)
>
Firewall/NAT
Topic: how to block all traffice from Lan ?
Pages: [
1
]
Topic: how to block all traffice from Lan ? (Read 1726 times)
how to block all traffice from Lan ?
« on: April 29, 2013, 06:29:47 »
AnteL_1366
Posts: 4
Hi there !
I have a m0n0wall Firewall and i wanna block all traffic from inside of LAN which it's not possible !!!
I wrote some rule in WAN and allow access some Ips from WAN to FW to see the Web GUI but i can't block the LAN IPs to not to see the Web GUI , all of my lan subnet can see the Web GUI !
how can i set the rule which is block all LAN traffic and keep Web GUI safe from lan clients !
Re: how to block all traffice from Lan ?
« Reply #1 on: April 29, 2013, 10:37:30 »
Lennart Grahl
Posts: 153
Have a look at the first firewall rule on the following picture:
http://www.abload.de/img/m0n0gou4y.png
Choose the "LAN" network instead of "Guest". "Destination" has to be your m0n0wall IP address on this subnet.
Re: how to block all traffice from Lan ?
« Reply #2 on: May 01, 2013, 11:55:02 »
AnteL_1366
Posts: 4
tnx for respond !!!
Unfortunately i have no Guest TAB in my m0n0wall version !!
how can i fix this issue ?
Re: how to block all traffice from Lan ?
« Reply #3 on: May 03, 2013, 16:11:20 »
Lennart Grahl
Posts: 153
You do not need a "Guest" network. It is just a name, like "LAN" is a name of a network, too.
Re: how to block all traffice from Lan ?
« Reply #4 on: May 03, 2013, 21:43:05 »
Lee Sharp
Posts: 517
First, look under
System -> Advanced
and find "Disable webGUI anti-lockout rule" and check it. Note that if you do not have a way back in after you do this, you will be locked out yourself.
Re: how to block all traffice from Lan ?
« Reply #5 on: May 07, 2013, 00:25:55 »
Lennart Grahl
Posts: 153
Thanks Lee, I completely forgot about that.
Pages: [
1
]