Hallo Forum,
ich habe hier schon einiges gelesen was der Fehler sein kann. Überwiegend waren es NAT Probleme.
Ich habe das Gefühl, das die Update Anfrage gar nicht heraus geht.
Ich habe m0n0wall schon komplett offen gemacht, glaub ich und trotzdem geht nichts raus.
Firmware: 1.8.1.
ErrorLog:
/usr/local/bin/ez-ipupdate[656]: failure to update ngwan0->87.139.116.197 (update-bla)
/usr/local/bin/ez-ipupdate[656]: malformed cache file: /var/db/ez-ipupdate.cache
/usr/local/bin/ez-ipupdate[656]: /usr/local/bin/ez-ipupdate started for interface ngwan0 host update-bla using server mw.gemeinsam-miteinander.de and service dyndns-custom
/usr/local/bin/ez-ipupdate[656]: ez-ipupdate Version 3.0.11b8, Copyright (C) 1998-2001 Angus Mackay.
config.xml
<?xml version="1.0"?>
<m0n0wall>
<version>2.0</version>
<lastchange>1392461367</lastchange>
<system>
<hostname>heimdall</hostname>
<domain>thomasgoldbach.zz</domain>
<dnsallowoverride/>
<username>ZZZZZZZZZ</username>
<password>ZZZZZZZZZ</password>
<timezone>Europe/Berlin</timezone>
<time-update-interval>300</time-update-interval>
<timeservers>0.m0n0wall.pool.ntp.org</timeservers>
<webgui>
<protocol>https</protocol>
<port>8852</port>
<certificate></certificate>
<private-key></private-key>
<mbmon>
<enable/>
<type>C</type>
</mbmon>
</webgui>
<dnsserver>8.8.8.4</dnsserver>
<harddiskstandby/>
</system>
<interfaces>
<lan>
<if>rl0</if>
<ipaddr>192.168.1.252</ipaddr>
<subnet>24</subnet>
<media/>
<mediaopt/>
</lan>
<wan>
<if>rl2</if>
<media/>
<mediaopt/>
<ipaddr>pppoe</ipaddr>
<spoofmac/>
</wan>
<opt1>
<if>re0</if>
<descr>LAN2</descr>
<ipaddr>192.178.1.252</ipaddr>
<subnet>24</subnet>
<bridge/>
<enable/>
</opt1>
<opt2>
<if>rl1</if>
<descr>LAN3</descr>
<ipaddr>192.188.1.252</ipaddr>
<subnet>31</subnet>
<bridge/>
<enable/>
</opt2>
</interfaces>
<staticroutes/>
<pppoe>
<username>XXXXXXXX</username>
<password>XXXXXXXX</password>
<provider>t-com-bui-dsl</provider>
<mtu>1492</mtu>
</pppoe>
<pptp/>
<dyndns>
<type>dyndns-custom</type>
<username>XXXXXXX</username>
<password>XXXXXXXX</password>
<host>update-bla</host>
<mx/>
<server>mw.gemeinsam-miteinander.de</server>
<port/>
<enable/>
</dyndns>
<dnsupdate>
<host/>
<ttl>60</ttl>
<keyname/>
<keydata/>
</dnsupdate>
<dhcpd>
<lan>
<range>
<from>192.168.1.10</from>
<to>192.168.1.99</to>
</range>
<enable/>
</lan>
</dhcpd>
<pptpd>
<mode/>
<nunits>16</nunits>
<redir/>
<localip/>
<remoteip/>
</pptpd>
<dnsmasq>
<enable/>
</dnsmasq>
<snmpd>
<syslocation/>
<syscontact/>
<rocommunity>public</rocommunity>
</snmpd>
<diag/>
<bridge/>
<syslog>
<reverse/>
<nentries>50</nentries>
<remoteserver/>
<remoteport/>
</syslog>
<nat>
<portrange-low/>
<portrange-high/>
</nat>
<filter>
<rule>
<type>pass</type>
<interface>wan</interface>
<protocol>tcp</protocol>
<source>
<network>wanip</network>
<port>49152-65535</port>
</source>
<destination>
<address>192.168.1.252/24</address>
<port>49152-65535</port>
</destination>
<log/>
<descr>Wan -> Heimdall->DynDNS</descr>
</rule>
<rule>
<type>pass</type>
<descr>Default LAN -> any</descr>
<interface>lan</interface>
<source>
<network>lan</network>
</source>
<destination>
<any/>
</destination>
</rule>
<rule>
<type>pass</type>
<descr>Default IPsec VPN</descr>
<interface>ipsec</interface>
<source>
<any/>
</source>
<destination>
<any/>
</destination>
</rule>
<tcpidletimeout/>
</filter>
<shaper/>
<ipsec>
<dns-interval/>
</ipsec>
<aliases/>
<proxyarp/>
<wol/>
<croen>
<interval>10</interval>
</croen>
</m0n0wall>
Ich hoffe mal es hat jemand eine Idee.
Grüße
Tom
Topic: DynDNS Problem