News: This forum is now permanently frozen.
linktree m0n0wall Forum  >  m0n0wall Support (English)  >  Services
linktree Topic: Getting T-1 Line installed
Pages: [1]
Topic: Getting T-1 Line installed  (Read 3767 times)
« on: July 11, 2007, 02:14:11 »
adrianp918
Guest
wowld m0n0 have any problem keeping up with the data throughput from a T-1 line, with 20 Ip address. what would be the limitations on it
« Reply #1 on: July 11, 2007, 04:05:47 »
cmb *****
Posts: 851
A T1 is nothing, a 486 with m0n0wall could fill a T1 at around 10% utilization. No limitations.
« Reply #2 on: July 11, 2007, 05:03:09 »
adrianp918
Guest
Thank you i will be running a 900 Mhz with 1 gig ram, would that be decent enough for the T1
« Reply #3 on: July 25, 2007, 01:44:09 »
cmb *****
Posts: 851
That's enough for like 75 T1's.  Smiley  You'll be in good shape.
« Reply #4 on: August 06, 2007, 23:22:10 »
adrianp918
Guest
Thank you very much for your help
« Reply #5 on: October 25, 2007, 05:46:34 »
imzjustplayin *
Posts: 8
Quote from: adrianp918 on July 11, 2007, 05:03:09
Thank you i will be running a 900 Mhz with 1 gig ram, would that be decent enough for the T1

I'm using a K6 II 450MHZ on an 8Mb down 1.5Mb up cable connection and I'm using most of the time like 2-10% CPU utilization. The only time it uses more which is quite rare is when it has to do LOTS of packet shaping with lots of concurrent connections. If you run VPN on there, that too should consume more bandwidth.
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines