News: This forum is now permanently frozen.
Pages: [1]
Topic: WPA does not get applied correctly in 1.3b3  (Read 2881 times)
« on: August 03, 2007, 06:18:17 »
GoldServe *
Posts: 16

I get this error when I reboot the system:

Aug 2 18:18:07    hostapd: ath1: STA 00:13:02:xx:xx:xx WPA: no PSK configured for the STA

When I go back to the wireless page and apply changes to the wireless adaptor without making changes, I can connect to the system.

For a workaround, is there a shell command I can execute on startup each time to apply the wpa settings again?
« Reply #1 on: August 04, 2007, 19:56:01 »
Manuel Kasper
Administrator
*****
Posts: 364

No shell command; for details see here:

http://m0n0.ch/wall/list/showmsg.php?id=327/48
« Reply #2 on: August 05, 2007, 02:23:51 »
GoldServe *
Posts: 16

I got around this problem temporarily by putting these two commands in my xml file under system. Hope this helps some people.

<shellcmd>killall hostapd</shellcmd>
<shellcmd>/usr/sbin/hostapd /var/etc/hostapd-ath1.conf</shellcmd>
 
Pages: [1]
 
 
Powered by SMF 1.1.20 | SMF © 2013, Simple Machines