m0n0wall Forum - Bug in <media> and/or <mediaopt>

Hey All,

I believe I have found a bug in the use of <media> and <mediaopt> on a Soekris 4801-50 running m0n0wall 1.231. I am working to lock down an Ethernet Interface on the router to 10 mbps and full-duplex. I used exec.php to find the correct tag options using ifconfig -m. Here is a snip of the .xml file I'm working with:

<interfaces>
<lan>
<if>sis2</if>
<ipaddr>10.43.10.1</ipaddr>
<subnet>24</subnet>
</lan>
<wan>
<if>sis1</if>
<mtu/>
<spoofmac/>
<ipaddr>10.43.7.10</ipaddr>
<subnet>24</subnet>
<gateway>10.43.7.1</gateway>
</wan>
<opt1>
<descr>OPT1</descr>
<if>sis0</if>
<ipaddr>10.43.43.10</ipaddr>
<subnet>24</subnet>
<gateway>10.43.43.1</gateway>
<media>10baseT/UTP</media>
<mediaopt>full-duplex</mediaopt>
<bridge/>
<enable/>
</opt1>
</interfaces>

Please notice the opt1 interface above contains <media> and <mediaopt> tags. Here is the ifconfig command output from exec.php on the m0n0wall after loading this configuration:

$ ifconfig
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=40<POLLING>
inet 10.43.43.10 netmask 0xffffff00 broadcast 10.43.43.255
ether xx:xx:xx:xx:xx:xx
media: Ethernet 10baseT/UTP <full-duplex> (100baseTX <full-duplex>)
status: active
sis1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=40<POLLING>
inet 10.43.7.10 netmask 0xffffff00 broadcast 10.43.7.255
ether xx:xx:xx:xx:xx:xx
media: Ethernet autoselect (10baseT/UTP)
status: active
sis2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=40<POLLING>
inet 10.43.10.1 netmask 0xffffff00 broadcast 10.43.10.255
ether xx:xx:xx:xx:xx:xx
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000

The sis0 output is a bit confusing here!! Any help would be appreciated.

Thanks, Greg