General Questions

Hey guys I'm running into a bump on the road, I run a Wow Private server and would like to use m0n0wall and a backbone firewall. I tried to use the Dynamic DNS but it's stuck and won;t work fully. If someone could direct me onto how to forward the following port I'd greatly appreciate it.

3724 - 3724
80 - 80
3306 - 3306
8129 - 8129
8093 - 8093
6112 - 6112
6881 - 6999
3036 - 3036
8050 - 8050

Thank you

["NAT"]

1. go to your monowall-webinterface
2. select "NAT" under Firewall section
3. press the "+" icon in the lower right corner
4. select the correct "Protocol"
5. enter the correct "External port range"
6. enter the IP of the PC you forward the ports to in "NAT IP"
7. if you entered a port range befor then leave "Local port" as it is
8. enter a meaningfull description
9. tick the "Auto-add a firewall rule to permit traffic through this NAT rule" checkbox
10. press "save"

Thanks alot I haven't tested it yet but will when i get home from work, also what would I use if i wanted to use Remote Desktop from work to connect my home PC through m0n0wall ? which port would I forward or what route to take.

default rdp port is 3389

but i would change it some "something else" -> http://support.microsoft.com/kb/187623