Hello All,
I have two identical m0n0wall images running at two different places. Also the configuration for both the images and the VM host machines is same. But my one image is running properly without any error, but other image is hanging abruptly and in system logs I am getting....
/kernel:
/kernel:
/kernel: Fatal trap 12: page fault while in kernel mode
/kernel: fault virtual address = 0xc39d7cd0
/kernel: fault code = supervisor write, page not present
/kernel: instruction pointer = 0x8:0xc0233e47
/kernel: stack pointer = 0x10:0xe5580e30
/kernel: frame pointer = 0x10:0xe5580e54
/kernel: code segment = base 0x0, limit 0xfffff, type 0x1b
/kernel: = DPL 0, pres 1, def32 1, gran 1
/kernel: processor eflags = interrupt enabled, resume, IOPL = 0
/kernel: current process = 19185 (mini_httpd)
/kernel: interrupt mask = net
/kernel: trap number = 12
/kernel: panic: page fault
/kernel:
/kernel: syncing disks...
/kernel: done
/kernel: Uptime: 12h24m1s
/kernel: Automatic reboot in 15 seconds - press a key on the console to abort
/kernel: Rebooting...
/kernel: Copyright (c) 1992-2005 The FreeBSD Project.
/kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
/kernel: The Regents of the University of California. All rights reserved.
/kernel: FreeBSD 4.11-RELEASE-p26 #0: Sat Jan 27 15:24:23 CET 2007
/kernel: root@fb411.neon1.net:/usr/src/sys/compile/M0N0WALL_GENERIC
/kernel: Timecounter "i8254" frequency 1193182 Hz
/kernel: CPU: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (1596.54-MHz 686-class CPU)
/kernel: Origin = "GenuineIntel" Id = 0x6f8 Stepping = 8
/kernel: Features=0xfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
/kernel: real memory = 1572864000 (1536000K bytes)
/kernel: avail memory = 1513615360 (1478140K bytes)
/kernel: Preloaded elf kernel "kernel" at 0xc1006000.
/kernel: Preloaded mfs_root "/mfsroot" at 0xc100609c.
/kernel: md0: Preloaded image </mfsroot> 11534336 bytes at 0xc0504e1c
/kernel: md1: Malloc disk
/kernel: Using $PIR table, 9 entries at 0xc00fdf30
/kernel: npx0: <math processor> on motherboard
/kernel: npx0: INT 16 interface
/kernel: pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
/kernel: pci0: <PCI bus> on pcib0
/kernel: pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
/kernel: pci1: <PCI bus> on pcib1
/kernel: isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
/kernel: isa0: <ISA bus> on isab0
/kernel: atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
/kernel: ata0: at 0x1f0 irq 14 on atapci0
/kernel: ata1: at 0x170 irq 15 on atapci0
/kernel: chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
/kernel: pci0: <VGA-compatible display device> at 15.0
/kernel: bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0x1060-0x107f mem 0xe8800000-0xe880001f irq 11 at device 16.0 on pci0
/kernel: bt0: BT-958 FW Rev. 5.07B Ultra Wide SCSI Host Adapter, SCSI ID 7, 192 CCBs
/kernel: lnc0: <PCNet/PCI Ethernet adapter> port 0x1080-0x10ff irq 10 at device 17.0 on pci0
If you see the uptime, its very low...just 12 hours...Earlier when I checked the logs it was 11 hours....
I am not sure.why this page fualt is happening and its automatically rebooting...
Please help..this is very urgent...
Topic: m0n0wall hangs abruptly..