Good morning. I am trying to connect a Cisco 2600 behind my m0n0wall. This is an exercise for me to learn IOS.
The setup is like this. DSL(192.168.1.254)
->m0n0wal LAN(192.168.1.97)->192.168.2.0->switch->PC1,etc
->OPT1->192.168.3.0 (m0n0wall is 192.168.3.1)-Cisco->PC
192.168.2.0/24 has been working flawlessly for over a year. DHCP plus several reserved IPs, wireless, etc.
OPT1 is 192.168.3.1, Cisco is 192.168.3.2. Devices connect to Cisco are 192.168.4.0/24 (PC2) and work fine within that network. Routes to 4.0 and .2.0 are setup in 2600 I can ping to both sides of Cisco from PC2, but can go no farther. PC1 can ping 192.168.3.1 (m0n0wall OPT1) fine, but go no farther.
(edit) Also set up static route to Cisco in m0n0wall.
I have also tried to add Cisco to .2.0 with reservation (.2.210), but get the same results.
I do have the right cables. Cisco shows connected to Soekris at 10Mb as expected.
That is a bit of a newb description I know, but would certainly appreciate any assistance getting Cisco box to talk to my m0n0wall.
|
Topic: Cisco 2600 behind m0n0wall